|
| |
| Contact Us |
For more information, please call
139 0529 1341 |
| |
|
| NewsLocation：Home > News |
The use of roller brush, you have chosen right? |
In our home decoration process, the general wall of our brush are used roller brush, rarely use paint brush, then how can we use the roller brush to play the best effect, how to do it is correct The use and maintenance, where we should carefully read, this Yong Shun process for you to conduct a detailed description:
When we use the roller brush, we must pay attention to the use of methods, roller brush is a wall paint construction works one of the main construction tools. The types of drums are used in different coating applications, such as flat drums, brushed rollers, rubber rollers, and so on. In order to achieve the desired construction effect, the construction staff to master the use of roller brush method to give full play to the roller brush coating effect, but also should understand the drum brush maintenance methods to extend the life of the roller brush.
The correct use and operation steps are as follows:
First of all, before brushing, the new roller with the paint to adapt to the thinner, the first drum wet.
Then, go to the waste paper or clean the wall to roll the excess paint. This facilitates the initial adsorption of the paint and facilitates the cleaning of the drum.
?When the drum is dipped in the paint, only half of the sleeve can be dipped, and then roll back and forth on the swash plate in the tray or on the barbed wire in the bucket so that the paint completely penetrates into the sleeve. If the adsorption coating is insufficient, you can divert more than once.
Roller cleaning: roller immediately after use to clean, so not only easy to clean, but also the cylinder is not easy to deformation, to extend the life of the drum. When cleaning, first rinse the drum with water and the paint on the tray, then put some washing liquid in the tray, the drum immersed in the washing liquid to shake, so that the washing liquid into the sleeve of the villi, and then remove the sleeve will be squeezed After going to the water, rinse until no color, and rinse the drum with water. Place the washed sleeve on the core and roll it quickly on the plane to let the fluff on the sleeve loose, so as to return to the original shape..
|
| Date：2017-09-21 〖return〗 〖collect〗 Clicks：2093 |
|
|
